DN200 8" Spring Load Swing Check Valve Stainless Steel Metal Seat CE Certificated

DN200 8" Spring Load Swing Check Valve Stainless Steel Metal Seat

Check Valve Features

(PN16) Spring Loaded Check Valve Dimension

(Unit:mm)

Check Valve Overview

Check Valves are automatic shut-off valves that are commonly used for preventing backflow or drainage in a pipe system.Often applied on the discharge side of pumps,check valves prevent the system from draining if the pump stops and protects against backflow, which could harm the pump and/or other equipment.

Swing Check Valve has a flat disc that pivots or swings about a hinge pin. They are low cost, and have low head loss characteristics when fully open. But because of the long stroke and inertia of the disc, the traditional swing check valve may slam in vertical pipe installations. These valves are therefore sometimes outfitted with a lever and weight accessoryy. They can handle liquids with solids such as wastewater.

Features of Spring Loaded Check Valve:

• Provides quick interruption of flow
• Provides positive sealing at pressures below the cracking pressure of the valve
• Does not require gravity or back flow pressure pressure to work or actuate.
• Prevents system fluid or gas back flow during routine maintenance
• Springs can accommodate very wide temperature ranges

Packing&Delivery

Packing Details:We choose suitable plywood cases according to different valves and arrange skilled workers to pack in case of bruise.Long term cooperated forwarder will book space,clear customs and transport for us without delay.There are three ways for transportation, by sea, by air and by train. We will arrange transportation according to customers' needs.

Delivery Details:7~40days bosed on you order quantity after deposite.

SS304 stainless steel check valve

SS316 high pressure check valve

DN600 high pressure check valve

DN200 8" Spring Load Swing Check Valve Stainless Steel Metal Seat CE Certificated Images